Print Page - .32 caliber barrel

Title: .32 caliber barrel
Post by: Tater73 on August 09, 2012, 02:03:59 AM

I'm looking for a .32 or .36 caliber barrel that will fit a cva stock. Please let me know if you know where i can buy one for a decient price.

Thanks Tater73

Title: Re: .32 caliber barrel
Post by: String Cutter on September 19, 2012, 08:46:26 AM

Tater they have one listed on gunbroker.com if you are still looking??

Title: Re: .32 caliber barrel
Post by: mongrel on September 19, 2012, 10:34:58 PM

If it's the .32 Squirrel Rifle barrel being sold by Muzzleloader707, that one is 3/4" in diameter and only fits the Squirrel Rifle stock.

Tater, what model CVA is your stock for? What's the barrel channel width? Depending on the model it could be 3/4", 7/8", 29/32", or 1". The 29/32" is probably the most common in the Hawken models and can be enlarged by careful scraping to accept a 15/16" diameter barrel. Despite being only 1/32" larger than 7/8", a 7/8" barrel will be a surprisingly sloppy fit, though glassing the barrel channel will cure that problem without being too awful noticeable.

The problem is finding a barrel of either 7/8" or 15/16" diameter in either .32 or .36 caliber. They exist, but they're not easy to find and when you do find one they aren't cheap. Numrich Gun Parts had 36" x 7/8" .32 caliber Green Mountains for roughly $125, shipped, but those are now sold out and will never be seen again -- at least not through Numrich.

Title: Re: .32 caliber barrel
Post by: Tater73 on September 20, 2012, 12:41:52 AM

Thanks guys. I found one on gun broker. It is a sloppy fit but i am planning to glass it in over the winter.

Tater

Traditional Muzzleloading on the Cheap

Member’s General Interest => Where can I get it? => Topic started by: Tater73 on August 09, 2012, 02:03:59 AM